F
LEXCELL
®
I
NTERNATIONAL
C
ORPORATION
2
Figure 1.
Flexcell
®
Flex Jr.
™
Tension System.
1) Surge protected power strip, 2) power outlet,
3) Ethernet cable, 4) reinforced vacuum tubing,
5) compressed air regulator/filter, 6)
3
/
8
”
VENT
tubing, 7)
3
/
8
”
SYSTEM
tubing, 8)
1
/
4
”
FLEX IN
tubing, 9)
3
/
8
”
FLEX OUT
tubing, 10) water
trap, 11) baseplate, and power cables.
Figure 2.
Flex Jr.
™
Tension FlexLink
®
rear
view
The Flex Jr.
™
Tension system will require a
space 25.0” (63.50 cm) wide by 10.25” (26.04
cm) deep if the computer, Flex Jr.
™
Tension
FlexLink
®
and monitor are placed side by
side. The total weight of the system is 16.4 lbs.
(7.44 kg).
Figure 3.
A) Acer Aspire laptop right side
view
.
B) Acer Aspire laptop left side view
.
C)
Connected Ethernet cable.
2.3 S
ETUP OF THE
C
OMPUTER
A
ND
THE
F
LEX
J
R
.
™
T
ENSION
F
LEX
L
INK
®
Setup the Acer laptop computer according to
the manufacturer’s instructions. Refer to
Figures 1-6 for proper setup of the Flex Jr.
™
system instruments. Place the Flex Jr.
™
Tension FlexLink
®
next to the computer and
connect the FlexLink
®
to the computer via
the Ethernet cable provided (Fig. 3).
If
additional
FlexLinks
®
have
been
purchased, they are to be placed side by side.
For multiple FlexLinks
®
to be controlled by
one computer, connect the Ethernet cable
from each FlexLink
®
to an Ethernet hub.
Then, connect the hub to the Ethernet port on
the back of the computer.
