Flexa CWT GALAXY, Use And Maintenance Manual

Page: 44 / 94

1.
2.
3.
4.
5.
6.
5.7 Checks before putting into service
Carry out the following checks before starting the machine:
Verify that the connections are complete and have been executed properly.
Verify complete and correct assembly of all parts.
Verify correct and complete assembly of the fixed guards.
Verify correct functioning of the safety devices.
Verify that the machine is completely free of assembly equipment and materials.
Verify that a general cleaning of the machine has been performed.
FLEXA S.r.l. Is responsible for the first commissioning of the machine.
Do not operate them machine if any one of the points listed in this paragraph is not successful.
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
36