Flexa CWT GALAXY, Use And Maintenance Manual

Page: 20 / 94

2.1.1 Self-locking spindle shaft
The spindle shafts, which are the same and interchangeable with one another, take on different functions in relation to the
position in which they are loaded into the machine (See par 2.1).
The shafts support 3-inch spindles (nominal) and are perfectly symmetrical (not polarised), thus allowing for easy placement on
the machine.
The shafts are equipped with two cords (A) for easy insertion of the core of the roll (B) on the shaft (C).
During shaft (C) rotation, the cords (A) block the core of the roll (B).
GALAXY
USE AND MAINTENANCE MANUAL
EN
MANUAL CODE: 756100330_EN
REVISION: 0
DATE: 07/03/2019
FLEXA S.r.l. - Partial or whole reproduction prohibited without authorisation
12