Assembly:
Step 1:
Start with the back panel and stand it upright.
Installation Guide
The system has:
• 1 x Fully assembled wall
• 2 x Foot plates (a)
• 2 x U-style top/bottom clips (b)
• 2 x T-style top/bottom clips (c)
• 20 x Stainless steel screws
Tools required:
• Cordless drill with a #2 Robertson or #2 Phillips bit.
• Rubber mallet may be required if connecting panels inline.
Notes:
• For easier installation, when connecting wall panels via tongue and groove, do not add the foot plates until after
the wall panels are connected. If the foot plates are already on, a rubber mallet will help connect them.
Step 2:
Use 2 foot plates to snap-in the wall from the top down; You now have your back wall completed.
• All back walls will use 2 foot plates.
(a)
(b)
(c)
