FLENDER ELPEX-S, Assembly And Operating Instructions Manual, Page: 32 / 80

Assembling
5.2 Assembling the coupling
32 Edition 09/2022 M3302-01en
Figure 5-4: Position of the balancing bore for two-plane balancing
① Part 1 and/or 2
② Balancing bore
Information
A better balancing result can be achieved by balancing the coupling parts (1, 101 and 3)
when they are screwed together. When balancing all parts together, mark the position of the
components relative to one another.
5.2 Assembling the coupling
5.2 Assembling the coupling
NOTICE
Property damage
Damage to the elastomer components from cleaning agents.
• Ensure that the elastomer components do not come into contact with cleaning agents.
NOTICE
Property damage
Damage to the shaft end, the coupling parts, the TAPER clamping bush and/or the parallel
key.
• Note the handling instructions regarding assembly of the coupling parts.
The procedure for assembling the coupling parts varies depending on the selected shaft-hub
connection.
• Mounting coupling parts 1 (1) and 2 (2) with shaft and hub connected by a parallel key
(Page 33)
• Mounting coupling parts 1 (1) and 2 (2) with shaft and hub connected by a pressurised
oil interference fit (Page 34)
• Mounting rubber disk element 5 (5) on the shaft for type EST using a TAPER clamping
bush with a parallel key (Page 35)
• Mounting coupling part 3 (3) with a flanged connection (Page 35)