FLENDER ELPEX-S, Assembly And Operating Instructions Manual, Page: 27 / 80

M3302-01en Edition 09/2022 27
Assembling
5
Assembly of the coupling comprises the following steps:
• Preparatory work (Page 27)
• Assembling the coupling (Page 32)
• Aligning the coupling (Page 36)
DANGER
Danger due to bursting of the coupling
If you do not observe the information stipulated here regarding assembly, this can lead to
bursting of the coupling during operation. There is a risk of fatal injury from flying frag-
ments. Bursting of the coupling can lead to an explosion in potentially explosive atmo-
spheres.
• Please observe all the stipulations concerning assembly.
Notes regarding assembly of the coupling
• Only use undamaged components when assembling the coupling.
• Follow the assembly sequence.
• Please ensure that there is sufficient space at the assembly location and that the loca-
tion is tidy and clean in order to be able to assemble and maintain the coupling without
any risk.
• If a dimension drawing has been created for the coupling, please observe the informa-
tion it contains as a matter of priority.
5.1 Preparatory work
5.1 Preparatory work
Please consult Flender if you want to machine a conical finished bore.
Carry out the following steps if the coupling does not have a finished bore:
• Milling the finished bore (Page 28)
• Mill the parallel keyway (Page 29)
• Machining an axial locking mechanism (Page 29)
• Balancing the coupling (Page 31)
Information
The customer is responsible for execution of the finishing work on the coupling. Flender
shall have no liability whatsoever for claims under warranty arising from finishing work that
has not been carried out adequately.