FLENDER BCC, Operating Instructions Manual, Page: 25 / 66

Assembly
5
Assembly of the coupling comprises the following steps:
● Preparatory work (Page 25)
● Assembling the coupling (Page 26)
● Aligning the coupling (Page 29)
WARNING
Danger of injury due to bursting of the coupling
If you do not observe the information stipulated here regarding assembly, this can lead to
bursting of the coupling during operation. There is a risk of fatal injury from flying fragments.
● Please observe all the stipulations concerning assembly.
Note
Information about the assembly of the coupling
● Only use undamaged components for the assembly of the coupling.
● Follow the assembly sequence.
● Please ensure that there is sufficient space at the assembly location and that the location
is tidy and clean in order to be able to assemble and maintain the coupling without any risk.
● If a dimension drawing has been created for the coupling, please observe the information
it contains as a matter of priority.
5.1 Preparatory work
No preparatory work is required, since the coupling is supplied finish bored, grooved and
balanced.
Balancing is performed to customer specifications or according to the half-parallel key
agreement (DIN ISO 21940-32) to balancing quality G16 (DIN ISO 21940).
BIPEX-S 3410en
Operating Instructions 10/2017
25