manualshive.com logo in svg

FLENDER ARPEX ARC-10, Operating Instructions Manual, Page: 35 / 36

Share
Download
FLENDER ARPEX ARC-10 Operating Instructions Manual Download Page 35

35

ARPEX 8704 en
Operating instructions  01/2019

12.

Declarations

12.1

EU declaration of conformity

EU declaration of conformity

Product:

FLENDER 

ARPEX

®

Couplings
Series 

ARS-6, ARP-6, ARH-8, ARC-6/8/10, ARW-4/6, ARF-6

Name and address of the manufacturer:
Flender GmbH
Schlavenhorst 100
46395 Bocholt
Deutschland – Germany

This declaration of conformity is issued under the sole responsibility of the manufacturer.

Object of the declaration is the product specified above.

The object of the declaration described above is in conformity with the relevant harmonisation legislation of the
Union:
– Directive 2014/34/EU 

Official Journal L 96, 29.3.2014, pages 309-356

Harmonised standards or other technical specifications, on which the declaration of conformity is based:
EN 1127-1

: 2011

EN ISO 80079-36 : 2016
EN ISO 80079-37 : 2016
EN ISO 80079-38 : 2017

The notified body, DEKRA EXAM GmbH, code number 0158, has received the technical documentation.

Signed for and on behalf of:
Flender GmbH

Bocholt, 

2019‐01‐01

Dr. Tim Sadek, Vice President, Applications Couplings

Summary of Contents for ARPEX ARC-10





































Reviews:

No comments