MLT-400i Installation Guide
Appendix A – ANTIR01 Antenna Installation
11/18/2009
FMS MLT-400i Installation Guide 4.3
11
Appendix A – ANTIR01 Antenna Installation
•
Keep antenna at least two feet from all other antennas
•
Size: 3.5”L, 2.2”W, 0.8”H
•
The ANTIR01 does not require a metal mounting surface
•
Recommended holes: 0.5937” (19/32), 2 places, clear-
ance for Iridium and GPS connectors; 0.107 (#36), 4 places,
size for 6-32 self tapping screws
•
Hole plug: for 0.5937 holes use Heyco 1675 (black) or 1676
(white); for use when removing antenna
•
Use hole template below as a drill guide. Check printed tem-
plate is sized to 1.660” between holes as dimensioned on the
template.
•
The connector located closest to the center is for the GPS ca-
ble (Blue), the connector located closest the end is for the
Iridium cable (Black)
•
Verify the template size with the actual antenna in case any scaling issues have
occurred during the printing process.
1.660"
Iridium (Black)
.5937" (19/32)
Diameter
GPS (Blue)
.5937" (19/32)
Diameter
.107" (#36)
Diameter
4 Places
1.660"
Iridium (Black)
.5937" (19/32)
Diameter
GPS (Blue)
.5937" (19/32)
Diameter
.107" (#36)
Diameter
4 Places
