MONOLIGHT
320M/620M/1220M AC/DC
Safety Precautions:
1.
Before using the light, make sure that the electrical
outlet of your local power supplier matches the power
regulation
indicated on your lighting equipment.
2.
Do not use any power supply other than the AC
specification indicated on your equipment.
3.
Do not expose your lighting equipment to sunshine,
moisture, dust, dirt, rain, or water.
4.
Any exposure to chemical solutions, gasoline, grease,
oil, paint, or detergents can result in permanent dam-
age to your equipment.
5.
Do not insert metal parts into any lighting equipment.
6.
Dry your hands before handling the equipment, as
touching your equipment with wet hands is dangerous
to both the equipment and to you.
7.
Do not keep the power on when the light is not in use.
8.
Do not attempt repairs to your lighting equipment
personally. If a problem arises, contact the store from
which you purchased the light.
9.
This flash has an over frequency protection circuit, rap-
id continuous firing of your flash will cause an audible
alert. continued rapid firing after audible alert will cause
the flash to cease operation and trigger a “cool down”
period of approximately of 10 seconds. after this period,
the flash will resume operation. You may also reboot
the flash by cycling the power off and then on.
Light Body &
Back
Control Panel
(1) Power Inlet Include Fuse
(2) Power Selection AC DC
(3) Synch Cord Socket
(4) On/Off Switch for Modeling Lamp
(5) On/Off switch for recharge read y-beeper/
Modeling lamp off
(6) Recharge Ready-Light
(7) Slave Sensor
(8) Handle Grip
(9) Locking/Releasing Bolt for Reflector& Soft
Box Connector
(10) On/Off Switch for Sensor
(11) Test Button
(12) Output Power Setting: flash/ modeling lamp
(13) Handle for Angle Adjustable
(14) Stand Mounting
(15) Stand Mounting Bolt
(16) Umbrella Holder
(17) Replaceable Flash Tube
(18) Modeling Lamp
(19) Cable Socket (DC inlet)
Model
FP320M
FP620M
FP1220M
1
Maximum Watt Seconds
150 ws
300 ws
600ws
2
Guide Number
118 ft
192 ft
230 ft
3
Flash Duration
1/600 to 1/1000
1/600 to 1/1000
1/600 to 1/1000
4
Flash Variability
Stepless Control from Full
Stepless Control from Full
Stepless Control from Full
Power to 1/32 Power
Power to 1/32 Power
Power to 1/32 Power
5
Recycling Time
0.5 - 1 Second
<1.5 Seconds
<3 Seconds
6
Recycling Time - Battery
<1.5 Seconds
<3 Seconds
<6 Seconds
7
Recycle confirm
Yes
Yes
Yes
8
Flash Ready Indicator
Ready Light & Audio Signal
Ready Light & Audio Signal
Ready Light & Audio Signal
9
Modeling Light Wattage
100 watts
150 watts
250 watts
10
Color Temperature
5600° K +-
5600° K +-
5600° K+-
11
Modeling Bulb Base
E26 - E27
E26 - E27
E26 - E27
12
User replaceable flashtube
yes
yes
yes
13
Built-In Slave
Yes
Yes
Yes
14
Slave Sensitivity
30ft. Radius,360 Degree
30ft. Radius,360 Degree
30ft. Radius,360 Degree
15
Synch Terminal
Yes
Yes
Yes
16
Synch Terminal Type
1/4" (6.35 mm) Phono Sync Terminal
1/4" (6.35 mm) Phono Sync Terminal
1/4" (6.35 mm) Phono Sync Terminal
17
Synch Voltage
5.6
5.6
5.6
18
Voltage Stabilization
110-130 ac +/- 0.5%
110-130 ac +/- 0.5%
110-130 ac +/- 0.5%
19
Fan Cooled
No
Yes
Yes
20 Test Button
Yes
Yes
Yes
21
Fuse
8A
10A
10A
22
Reflector/Removable
8" inch
8" inch
8" inch
23
Mount
Flashpoint
Flashpoint
Flashpoint
24
Housing Type
Rugged Metal Housing
Rugged Metal Housing
Rugged Metal Housing
25
Dimensions
L 11" W 5.6" H 7.5"
L 15" W 5.6" H 7.5"
L 15" W 5.6" H 7.5"
26 Weight
3 Lbs (1.7kg)
4-1/2 Lbs (2.4kg)
7 Lbs (3.2kg)
16
15
14
13
14
13
2
4
6
5
8
12
7
3
11
10
9
1
17
18
9
PO
WE
R
MODEL
FULL
DIM
SOUND
TEST
SENSOR
DC
AC
SYNC
FUSE 10A
READY
OFF
19
