Flash professional LED PAR 64 COB 250W 2xWhite Mk2, User Manual

Page: 3 / 12

www.flash-butrym.pl
2
1 INTRODUCTION
Thank you for purchasing LED PAR 64 COB 250W 2xWhite Mk2. For safety reasons and to ensure the
trouble-free operation, carefully read the instructions.
2 SAFETY INFORMATION
1. Installation should be done by qualified personnel in order to minimize the risk of accidental
electric shock
2. Disconnect the power supply before installation.
3. Before connecting the unit to the mains, make sure it is not damaged mechanically. If you
notice any signs of damage you should contact your dealer immediately. Do not connect the
device to the mains.
4. Do not use the device in high humidity conditions and at temperatures above 40° C
5. The device must be installed on stable structures
6. Always use steel security cable to attach the device to a stable structure
7. Do not connect power supply to more than 4 devices in series.
3 PRODUCT INFORMATION
3.1 Features

Dedicated Color Temperature Correction channel (CTC)

2200K to 5200K color temperature (warm to natural white)

16-bit dimming resolution

Various dimming curves for smooth dimming in 8-bit mode

Dim delay (light bulb simulation)

Full DMX signal regeneration

Electronic protection against overheating

THEATRE or DISCO cooling volume modes.

Permanent color correction

Native support for optional wireless DMX module
3.2 Specification

Power consumption: 250W

Power supply voltage: 100 - 245V

Voltage frequency: 50/60Hz

Diode type: 2xWhite COB

Number of diodes: 1

Diode power: 250W

Display: Color LCD

Color: Warm white (2200K), natural white (5200K)

Beam angle (min): 37°

Beam angle (max): 37°

Dimming: Linear: 0 - 100%

Flash frequency (min): 1Hz

Flash frequency (max): 20Hz

DMX standard: DMX 512

Control interface: 4 buttons