27
VENTLESS POWER BOARD
Ventless Fireplaces have a small electronic Board installed inside the ventless box it used to manage and control
the Electric Draw from the Source power to the Honeywell Valve using the Proximity Sensor.
1.
POWER SOURCE: ELECTRICAL POWER SOURCE 110V AC.
2.
LED POWER: LED POWER SUPPLY 110V
3.
DOOR SWITCH: PROXIMITY SENSOR PORT, SENSOR WILL
BE CONNECTED HERE ACCORDING TO THE LABELED
COLORS.
4.
HONEYWELL POWER: HONEYWELL POWER 110V
PORT CONTROLLER BY THE PROXIMITY SENSOR
STATUS.
5.
LED LD1: LED POWER INDICATOR (RED LIGHT).
6.
BYPASS JUMPER: THIS JUMPER WILL BE USED TO
BYPASS THE DOOR SWITCH IN CASE OF HAVING
AN ISSUE IN THE DOOR SWITCHES.
NOTE
: MOVING THIS JUMPER TO THE
BYPASS MODE
WILL ALLOWS THE FIREPLACE TO RUN EVEN THE DOOR IS
EXISTING. BE CARFUL WHEN CHANGE TO
BYPASS MODE
1
2
3
4
5
6
BY PASS MODE
SENSOR MODE
