16 |
P a g e
WALL SWITCH
–
OPTIONAL
In case of losing the remote control or empty batteries, there is another option to control the fireplace which is
located on the
X8 port
of the IFC module which the WALL SWITCH. The following operation can be done from the wall
switch:
-
Turn ON fireplace
-
Turn OFF fireplace
Note:
Flare Fireplaces supplies each fireplace a wall
switch and a remote control to control the unit. Please
note, only one device should be used in a cycle of
powering the unit on and off. If you utilize the remote
control to power the appliance on, use the remote to
also power the unit off.
Trying to utilize different methods in a cycle could result
in one method failing to control unit until appliance has
been powered down and the cycle ended.
SIT wall switch can be run with up to 100 FT of wire.
