www.flamcogroup.com
© 2014 Flamco group. All rights reserved.
We reserve the right to change designs and technical specifications of our products
.
Rev 8.1 Aug-15 Page
2
/
44
Customer Details
Please fill in information future reference:
Company:
Contact:
Address:
Tel No:
Fax No:
Post Code:
E-mail:
Equipment Details
Details of model and serial number may be found on the label
Model:
Serial No:
Purchase date:
Purchase From:
Note:
It is highly recommended to have this equipment commissioned by a Flamco approved engineer. Any damage or
loss incurred through incorrect commissioning by an unapproved engineer will not be covered by the warranty.
If you wish for Flamco to arrange this please contact us. (See contact details)
Please see the warranty section for details.
Remember to fill in details for future use for re-commission unit.
Remember: When installing a expansion vessel with the pressurisation unit make sure the cold pressure is the
same in order for the system to work effectively.
Flexfiller Mini 130D & 230D - Under no circumstances must be used to fill a system of any size.
