EC DECLARATION OF CONFORMITY
Herewith we declare that the air movement equipment designated below, on the basis of its design and
construction, in the form brought on to the market by us, is in accordance with the relevant safety and
health requirements of the EC Council Directives on Machinery, Electromagnetic Compatibility. If
alterations are made to the machinery without prior consultations with us, this declaration becomes
invalid. We further declare that the equipment identified below may be intended to be assembled with
other equipment/machines to constitute machinery, which shall not be put into service until the
assembled machinery has been declared in conformity with the provisions of these EC Council
Directives.
Designation of equipment:
Series/type:
Fläkt Woods Limited
Order/Stroke No:
Relevant EC Council Directives:
Machinery Directive (2006/42/EC).
Electromagnetic Compatibility Directive (2004/108/EC) where applicable (3)
Applied harmonized standards
in particular:
EN ISO 12100:2010, EN 60204-1:2006, EN ISO 12499:2008
EN ISO 5801:2008, EN ISO 13350:2008, EN 61000-6-2:2005, EN 61000-6-1:2007
EN 61000-6-3:2007/A1:2011/AC:2012, EN 61000-6-4:2007/A1:2011
Applied national standards
and technical specifications
in particular:
BS 848-2-1:2004 (BS ISO 13347-1:2004)
BS 848-6:2003 (BS ISO 14695:2003)
BS 848-7:2003 (ISO 14694:2003)
Basis of self attestation:
Quality Assurance to BS EN ISO 9001:2008
BSI Reg Firm Cert No. FM 155.
Signature of Manufacturer:
Position of signatory:
Managing Director
Date:
Notes:
For the complete list of applied standards and technical specifications see Fläkt Woods documentation.
Where no relevant harmonized standards exists.
Woods fans are driven by AC induction motors which are inherently compliant if supplied with a truly sinusoidal AC
supply. Where the fan motor is supplied via an inverter or other electronic control, verification of its compatibility
together with cabling should be sought from the control supplier.
Fläkt Woods Limited
Axial Way
Colchester CO4 5ZD
United Kingdom
Tel: +44 (0) 1206 222555
Facsimile: +44 (0) 1206 222777
Email: [email protected]
Website: www.flaktwoods.com
Registered in London No. 233771
Registered office Axial Way, Colchester, CO4 5ZD, UK
© Fläkt Woods Limited December 2009
1)
2)
3)
1)
2)
Direct Drive Axial Flow Fan
HT090JM/25/04-08/06/22 50Hz 3 S D132 40012
SO-0000716/1
04/02/2015
Ian Morehouse
Place: Colchester
Technical File Compiled By:
Iain Kinghorn
Axial Way, Colchester, CO4 5ZD, UK
10. EUROPEAN MACHINERY DIRECTIVE 2006/42/EC
1.7.4.2 CONTENTS OF THE INSTRUCTIONS
CLAUSE C)
Please see a typical example of an EC declaration of conformity certificate (below), which shows particulars of
the machinery offered.
CLAUSES G) AND H)
Fans should not be operated above maximum speed indicated, or run where the fan is operating in a stalled
condition. Fans should also not be run in reverse unless specific advice is sought from Fläkt Woods.
CLAUSES I) AND J)
Fans should be isolated from support structures by means of anti-vibration mounts and from adjacent ductwork
by flexible connections.
CLAUSE K)
Care should be taken when installing fans to ensure that the product orientation is correct in relation to
direction arrows which indicate direction of air movement and impeller rotation direction. Where two-stage fans
are shipped as two separate fan units, please refer to the appropriate two-stage assembly drawing, which is
available on request. Also see figure 1.
8
