background image

MultiMAXX HE

Safety and User Information

FläktGroup DC-2011-0142-GB 2018-05/R5 • Subject to modifications

5

1

Safety and User Information

This is an original operation manual verified by the manufacturer.

The Multi

MAXX

 HE electric unit heaters are developed and manufactured in accord-

ance with the state-of-the-art technological standards and established technical safety 
codes and meet the requirements of the EC Directive on Machinery.

The Multi

MAXX

 HE electric unit heaters are reliable in operation and satisfy strict qual-

ity standards. This product range combines future-oriented technology with a high level 
of user friendliness and ease of maintenance.

However, all electric unit heaters could pose unavoidable residual risk of injury or risk 
of equipment or property-damage only accidents. Therefore your personal safety and 
the proper operation of the unit depend on the strict observance of the safety instruc-
tions. Failure to follow the safety precautions could result in death, serious injury or 
equipment or property-damage-only accidents.

Observing the safety instructions in the current operation manual will help avoid the 
risks, ensure economical operation of the unit and enjoy full benefits of the product.

The safety aspects covered by this chapter are valid for the entire operation manual.

1.1

Availability of the operation manual

The accompanying operation manual includes important instructions on safe and cor-
rect operation of the Multi

MAXX

 HE electric unit heaters.

This manual must always be available at the site where unit is operating. Every person 
working on the equipment must read this manual fully before commencing the work 
and take all relevant information while performing a task into account.

This operation manual applies to operators, building technicians, technical personnel 
or instructed persons as well as electricians.

1.2

Scope of the operation manual

This operation manual covers critical points on the following subjects:

– Shipping

– Assembly

– Installation

– Electrical connection

– Commissioning and operation

– Maintenance, cleaning and disposal

1.3

Used symbols

The following symbols are used in this manual:

– This symbol is used to indicate normal lists.

This symbol indicates instructions to follow.

The result of an action is indicated with this symbol.

NOTE!

This symbol denotes additional instructions on using the Multi

MAXX

 HE.

Summary of Contents for MultiMAXX HE Series









































Reviews: