MultiMAXX HE
38
FläktGroup DC-2011-0142-GB 2018-05/R5 • Subject to modifications
8
Dismantling and Disposal
8.1
Dismantling
To dismantle the electric unit heater proceed as follows:
•
Release the fixing to the wall or ceiling.
The unit is ready for transporting.
•
All relevant instructions regarding shipping and transportation specified on page 13
must be followed.
8.2
Disposal
ENVIRONMENTAL DAMAGE!
Only qualified licensed staff must dismantle and dispose of the unit!
HAZARDOUS VOLTAGE!
When carrying out decommissioning and dismantling work on the unit, disconnect all
power supply connections, ensure the power cannot be inadvertently energised and
verify that electric lines have been disconnected. Earth and short-circuit them, and
cover or otherwise isolate any neighbouring live parts. Non-compliance can lead to
death or serious injury.
PERSONAL INJURY!
Secure the unit against slipping.
RECYCLING!
An authorized appointed contractor specializing in waste processing must dispose
of the unit or its individual components.
entsprechender Befähigung durchführen. This technical services department must
ensure that:
– the components are separated according to material types
– used operating materials are sorted and separated according to their respective
properties.
ENVIRONMENTAL DAMAGE!
•
Depending on the material type, dispose of all components and operating supply
materials in an environmentally-friendly manner in accordance with the local
codes, practices and relevant regulations.
