FläktGroup Multi-DENCO, Operation Manual, Page: 42 / 120

Installation Multi -DENCO
42 FläktGroup DC-2013-0101-GB • Subject to modifications • R4-05/2018
5.3.1 Placement without raised floor
The unit could be placed on a lift truck or two to six-wheeled platform and manoeuvred
to its installation site. Once in position, check and adjust levelling will need to be con-
ducted.
•
Care should be taken to prevent damage from contacting the unit by the lifting gear/
slings or fork lift truck etc.
•
Lift the unit from the pallet and take care to manoeuvre it.
•
The unit should be lifted from the base frame only with suitable measures to prevent
tipping or rolling.
5.3.2 Placement on raised floor
•
Perform the levelling of the unit at the installation site.
•
Take good care when manoeuvring the unit during placement using wheeled
platform.
•
At the same time secure the unit against tipping.
5.4 Clearance and Access
5.4.1 Clearance
Fig. 5-8
Columns A, B and D are recommended minimum values to ensure satisfactory
operation by your Multi -DENCO unit.
Column C is the mandatory minimum values to ensure serviceability for your
Multi -DENCO unit.
NOTE!
We strongly recommend using a third party, specialist lifting company to offload and
position all
Multi -DENCO equipment.
Size Unit
Width
mm
Nominal
Airflow
m
3
/s
Clearance
above unit (A)
mm
Floor
Void (B)
mm
Service Ac-
cess (C)
mm
Distance to
first floor grille (D)
mm
010 600 0.83 300 300 600 2000
018 800 1.43 300 300 600 2000
030 1180 2.40 400 400 600 2000
045 1670 2.53 400 400 600 2000
065 1992 5.09 500 500 600 2000
092 2500 6.59 500 500 880 2000
130 3380 9.19 500 500 880 2000
Tab. 5-1:
Note!
Column C is ONLY the minimum service requirements and does not reflect any
safety requirements that may affect your local region. Refer to your local Health and
Safety regulation for aisle clearances and free space requirements to ensure a safe
working environment.