FläktGroup eQ PRIME 005, Commissioning, Page: 62 / 64

62 FläktGroup DC_9355GB 20180119_R0 We reserve the right to make changes without prior notice
Updating from an SD card
The controller is equipped with an SD card reader.
An
SD card can be used to update the software and
configurations.
Instructions for loading configurations via memory card:
• Insert the memory card supplied by FläktGroup
into the card reader in the control unit.
• Then go to the following menu using the handheld
terminal:
MAIN INDEX Ú SYSTEM OVERVIEW Ú
SAVE/RESTORE
Save / restore Settings
Config.save -> SD
-
Config save SD done
Config.load <- SD
-
Conf load SD done
Restart
Par.service load
Par.factory load
A-snapshot save->SD
Trace save -> SD
Par.service save
BSP load
No
No
• Upload the settings from the memory card with
the parameter “Config load <- SD”.
• When the parameters have been loaded to
the control unit, restart the eQ PRIME unit using
the “Restart” function in the above menu, or by
switching off and then switching on the incoming
power.
15