FläktGroup eQ PRIME 005, Commissioning, Page: 40 / 64

40 FläktGroup DC_9355GB 20180119_R0 We reserve the right to make changes without prior notice
Operating hours
The control unit in the eQ PRIME is equipped with operating
time meters for fans and circulation pumps. They can
be used to signal a need for maintenance, e.g. filter
replacement.
MAIN INDEX
Ú
UNIT
Ú
OPERATING HOURS
If you want the control unit to emit an alarm signal after the
fans have been operating for a certain period, this function
must be activated during commissioning.
MAIN INDEX
Ú
UNIT
Ú
OPERATING HOURS
Ú
FAN SETTINGS
The desired alarm time must be set with a parameter in
the same menu.
Operating hours
Supply fan
Reset
Exhaust fan
0 hrs
Execute
0 hrs
Reset Execute
Fan settings
0 hrs
Execute
0 hrs
Execute
Heating pump
Reset
Cooling pump
Reset
Air handling unit
Alarms
Alarms
are indicated by a red LED on the alarm button (4)
on the handheld terminal. Press the alarm button once
to show the alarm on the display. Press the alarm button
once more to show the entire alarm list. Alarms are
presented in clear text in the alarm list. Scroll through the
alarm list using the up and down buttons (5, 6).
Alarm acknowledgement
Acknowledge an alarm
by logging in and then pressing the
alarm button (4) twice so that “Alarm list” appears on the
display.
The “Acknowledge” function is at the top of this page,
along with the number of alarms. Place the cursor on
this row using the up and down buttons (5, 6). Press
the Enter button (7) and select “Active” to acknowledge
an alarm. If the alarm persists, the light on the alarm
button will shine continuously.
Alarm list
Acknowledge
+ MB comm alarm: Alarm
+ Exhaust air flow: Alarm
2
Repeatedly pressing the alarm button causes the alarm
menus to circulate in the following order:
ALARM LIST DETAIL Ú ALARM LIST Ú
ALARM HISTORY Ú SETTINGS Ú
ALARM LIST DETAIL...
Return to the previous menu using the ESC button (3).
9