Shipping and Storage
CAIR
fricostar
®
20
FläktGroup DC-2009-0019-GB 2018-01/R9 • Specifications are subject to alteration without notice
4
Shipping and Storage
4.1
Delivery
FläktGroup CAIR
fricostar
unit can ship as a single piece or multiple individual shipment
units. Delivery is done on transport pallets.
•
When the unit is delivered, check that the shipment is correct according to the
despatch note, and also check for completeness.
What steps should I take in
case of shipping damage?
External side of the packaging is damaged
1
Unpack the equipment in the presence of the lorry driver and document the
damage in the shipping order.
2
Inform the FläktGroup office immediately.
External side of the packaging is O.K., the contents is damaged.
1
Once you have established the extent of the damage, report the damage to the
FläktGroup office in writing.
2
Take photographs of the damaged parts.
3
Possible shipping damage must be reported no later than 4 days following the
delivery.
Processing of claims will not be possible, if the above-mentioned steps are not fulfilled.
In both cases, before installing the units - consult the FläktGroup office.
4.2
Transport
•
For shipping and rigging the FläktGroup unit use the lifting lugs or lifting points
provided by the manufacturer.
•
For safety reasons wear gloves and safety footwear when lifting or shipping the unit.
NOTICE!
Consider instructions relating to the procedures in case of shipping damage on the
unit packaging or in despatch documents!
NOTICE!
For unit shipment use the original packing only. Remove the original packaging
only before installation.
DANGER OF OVERHEAD LOADS!
Never stand beneath suspended loads, there is always a risk that the lifting gear,
tackle, ropes or slings could be damaged. Failure to follow safety precautions
could result in death or serious injury.
