FISHTRON RX SIX Remote Listening Receiver
Instructions for operation and use (last updated on 13 Oct 2017)
Thank you for purchasing the FISHTRON RX SIX remote listening receiver.
We hope you’ll be satisfied.
The new remote listening receiver allows receiving
up to six devices; a bite can be signalled
acoustically, visually and using vibrations. It not only
works with the FISHTRON NEON TX3, FISHTRON
Q9-RGB TX and FISHTRON CatFish TX3 bite
alarms, but also detects an alarm from the
FISHTRON ALF3 wireless sensors and can connect
to other FLAJZAR accessories. Simple, small,
easily carried and has a long life battery - this is the
new FISHTRON RX SIX receiver.
Description of FISHTRON RX SIX
The FISHTRON RX SIX six-channel receiver is designed for wireless fish bite or alarm evaluation. All six
channels can be used to save either bite alarms or alarms. The kit’s reach, i.e. the transmitter from the receiver,
is up to several hundred metres in free space. The receiver can be paired with FLAJZAR bite alarms, such as
the FISHTRON NEON TX3, FISHTRON Q9-RGB TX or FISHTRON CatFish TX3 or FISHTRON ALF3 alarm
sensor.
The receiver is switched on with a sliding switch located on the left side. When the power is on, the battery status
LED flashes briefly: green = battery OK, red indicates low battery (up to several tens of hours remaining).
The PLUS and MINUS buttons are located on the right side and are used for sound signalling volume control
in normal mode. They also activate or deactivate vibrations.
Summary of Contents for FISHTRON RX SIX
Page 4: ......
