Flaircomm Technologies Inc.
5
Address
：
No 211 North Urumchi Road, Suite 616, Shanghai, PRC, 200040
Telephone
：
86-21-62495778, 86-21-62496778, 86-21-62496878 Fax
：
86-21-62494858
www.flaircomm.com
.
Pairing and Connecting
Pairing
When the AV adapter is entering the pairing mode, it will search the bluetooth device for pairing.
If the pairing is failed, AV adapter will enter the standby mode after 3 minutes. Then Blue LED will give 1 blink per 3
seconds.
If the pairing is successful, AV adapter will try to connect with paired bluetooth device. The Blue LED will give 3
quick blinks per 5 seconds, Red LED is off.
Connecting
Try to connect
In the standby mode, if you press the Key, the AV adapter will try to re-establish the connection with last paired
device. Blue LED will change from 1 blink per 3 seconds (Standby Mode) to 3 quick blink per 5 seconds (Connecting
Mode). Red LED is off.
During the normal operation, if the connection between the AV adapter and the headset is dropped, AV adapter will
try to re-establish the connection with the headset automatically. This re-connection process will remain for about 1
minute.
Connecting
When the pairing is successful, AV adapter will try to connect with paired bluetooth device.
If the connection is successful, the Blue LED will give 3 quick blinks per 2 seconds.
If the connection is failed, the device will enter the standby mode after 1 minute.
Three working modes of AV adapter
Used as a Line-in Dongle
In general, AV adapter will use the Line-In port as default. Anyway, if the USB Cable is not plugged in, AV adapter
will be used as a Line-in dongle.
Used as an AV USB Dongle
Once USB Cable is plugged in, and the PnP is successful. The AV adapter can be used as an AV USB Dongle without
any driver and it will behavior like a PnP device.
Used as a common USB Dongle
1. Plug USB Cable into AV adapter, then start ‘avcontrol’ (You can download the software on our website) to show
the main window as figure 1.
