Flachmann und Heggelbacher Docklight V2.2, User Manual

Page: 48 / 83

48
Docklight V2.2 User Manual 07/2016 Copyright 2016 Flachmann und Heggelbacher GbR
Reference
Open the communication ports and enable serial data transfer.
Stop communication
Stop serial data transfer and close the communication ports.
Tools Menu
Start Communication Logging ...
Create new log file(s) and start logging the incoming/outgoing serial data. See logging
and analyzing a test .
Stop Communication Logging
Stop logging and close the currently open log file(s).
Start Snapshot Mode
Wait for a trigger sequence and take a snapshot. See Catching a specific sequence...
Stop Snapshot Mode
Abort a snapshot and reenable the communication window display.
Keyboard Console On
Enable the keyboard console to send keyboard input directly.
Keyboard Console Off
Disable the keyboard console.
Show Notepad
Show the notepad window .
Project Settings...
Select the current project settings ( communication settings , flow control settings ,
communication filter ...).
Options...
Select general settings (e.g. display).
Expert Options...
Select expert program options intended for advanced users and specific applications
(e.g. high monitoring accuracy).
8.2 Dialog: Edit Send Sequence
This dialog is used to define new Send Sequences and edit existing ones (See also
Editing and Managing Sequences ).
Index
The index of the sequence displayed below. The first sequence has index 0 (zero).
1 - Name
Unique name for this sequence (e.g. "Set modem speaker volume"). This name is for
referencing the sequence. It is not the data that will be sent out through the serial port.
See "2 - Sequence" below.
2 - Sequence