FKI SDF-22 Instructions For Use Manual Download Page 11

Page: 11 / 37

Fixation

The appliance does not need to be secured. It is equipped with wheels and/or adjustable legs to
ensure stable and easy installation.

Operation

The appliance must be supervised during use and must be switched off at its main switch if left.

Fryer STD is intended for food preparation only.

Never fill the appliance with oil or fat when it is

switched on. Oil/fat can ignite if it contacts the heating elements. It can also produce intense
smoke.

Cleaning/maintenance

CLEANING AND MAINTENANCE WARNING: Turn off the appliance and allow it to cool before per-
forming daily cleaning or maintenance tasks. Do not use products that contain acid as they may
damage the surface of the appliance.

Never use steam/foam cleaners due to RISK of electric shock.

Servicing

WARNING: The appliance has two supply connections, which must both be disconnected before
starting service work on the appliance!

The appliance must always be switched off and disconnected from the power source before com-
mencing repair work.

Summary of Contents for SDF-22






































Search results

Summary of Contents for SDF-22

Reviews:

Brands by name

Popular brands

FKI SDF-22, Instructions For Use Manual

Search results

Summary of Contents for SDF-22

Reviews:

Brands by name

Popular brands