FKI Friomat FKE 1615 DG, User Manual

Page: 8 / 24

8
5.4 Encoding
All encoding must be done in Standby mode. Raise the heat section, so the heat elements
are disconnected by the magnetic switch before the fryer is activated by pressing ON.
5.4.1 Encoding of times for deep frying

Press [2] and hold for more than 6 sec. The programming menu 2 will appear in the display.

Press the number of the program (1-6) on which you want to modify the time.

The time is changed by pressing [+] or [-].

The program returns to menu after 5 seconds, and the modified time is saved.

To exit the menu, press RESET.
5.4.2 Encoding the temperature

Press [3] and hold for more than 6 sec. The programming menu 3 will appear in the display.

Press [1] to change the Standby temperature.

Press [2] for the change in operating temperature.

To change the temperature press [+] or [-].

The program returns to menu after 5 seconds, and the modified time saved.

To exit the menu, press RESET.