background image

 

 

FSSASD-R_G220v.PUB 

Rev. G  -01/10 

ELECTRONIC AIR CLEANER 

LIMITED FIVE (5) YEAR WARRANTY

 

 

FIVE  YEAR  WARRANTY  - 

This  FIVE  SEASONS  product  is  warranted  to  be  free  from  electrical  and  mechanical 

defects in material and  workmanship, under normal use and maintenance  within its listed capacity, for a period of 
FIVE (5) years from the date of original purchase.  The FIVE SEASONS product must not have been moved from the 
site  of  original  installation.    A  new  or  remanufactured  part  to  replace  the  defective  part  will  be  provided  without 
charge  for  the  part  itself,  through  an  authorized  FIVE  SEASONS  service  dealer,  provided  the  defective  part  is 
returned  to  the  FIVE  SEASONS  distributor 

prepaid

.    The  replacement  part  assumes  the  unused  portion  of  the 

warranty.  

Proof  of  Purchase  and  Installation

 must be provided.  Failing this, FIVE SEASONS will guarantee the 

unit for a period of sixty (60) months from the date of manufacture, according to the manufacturer’s records.  The 
warranty does not include the prefilters, carbon filters or ionizing wires. 
 

THIS WARRANTY DOES NOT INCLUDE ANY ADDITIONAL LABOR ALLOWANCE OR OTHER COSTS

 incurred 

for diagnosis, repairing, removing, installing, shipping, servicing, or handling of either defective parts or replacement 
parts.  Such costs may be covered by a separate warranty provided by the dealer. 
 

LIMITATIONS  OF  WARRANTY 

- All implied warranties (including implied warranties of merchantability) are hereby 

limited  in  duration  to  the  period  for  which  the  limited  warranty  is  given.    The  expressed  warranties  made  in  this 
warranty  are  exclusive  and  may  not  be  altered,  enlarged,  or  changed  by  any  distributor,  dealer  or  other  person 
whatsoever. 
 

FIVE SEASONS COMFORT LIMITED WILL NOT BE RESPONSIBLE FOR: 

1.  Normal maintenance  as  outlined  in  the  Owner’s  Manual  including  cleaning  of  electronic  collecting  cells  and/or 

replacement of carbon filters. 

2.  Damage or repairs required as a consequence of faulty installation or application by others. 
3.  Damage  or  repairs  needed  as  a  consequence  of  any  misapplication,  negligent  handling,  improper  servicing, 

unauthorized alteration, or improper operations. 

4.  Failure  to  start  due  to  voltage  conditions,  blown  fuses,  open  circuit  breakers  or  other  damages  due  to  the 

inadequacy or interruption of electrical service. 

5.  Damage as a result of floods, winds, fires, lightning, accidents, corrosive atmosphere, or other conditions beyond 

the control of FIVE SEASONS COMFORT LIMITED. 

6.  Parts not supplied or designated by FIVE SEASONS COMFORT LIMITED. 
7.  FIVE  SEASONS  COMFORT  LIMITED  products  installed  outside  the  continental  U.S.A.,  Alaska,  Hawaii,  and 

Canada. 

8.  Any personal injury, special indirect or consequential property or commercial damage of any nature whatsoever. 
 
 

Model No. 

 

 

 

 

 

Serial No. 

 
Date Of Installation 

 

 

 

 

Installed By 

 
Owner’s Name & Address 

 

 

RETAIN THIS CERTIFICATE WITH YOUR VALUABLE DOCUMENTS 

FIVE SEASONS COMFORT LIMITED 

351 North Rivermede Road, Concord, Ontario, Canada  L4K 3N2 

Tel:  (416) 213-5636                Fax:  (416) 213-5593 

Toll Free North America:  1-800-267-8305 

Email:  [email protected] 

Web:  www.fiveseasonsaircleaners.com 

ATTENTION INSTALLING CONTRACTOR:  IF FAILURE SHOULD OCCUR, DO NOT RETURN PRODUCT TO THE 

DISTRIBUTOR.    CALL  THE  TOLL-FREE  HOTLINE  1-800-267-8305 
FOR TECHNICAL ASSISTANCE. 

Summary of Contents for SASD10-2

















Reviews: