4
ASSEMBLY STEPS
STEP 1:
Open the package, take out all parts and place the main frame on a flat surface.
(
NOTE
: Do not cut the packing straps yet.)
STEP 2:
1. Cut the packaging straps and do not move the treadmill.
2. Connect the Controller wire (98) and the Lower extension wire (97).
3. Attach the Upright tube (3) to the Bottom frame (1) with the Hex socket screws (57) and
Lock washers (83).
NOTE
: Do not tighten the Hex socket screws (57) yet.
4. Insert the Protective covers (29L/R) into the Upright tubes (3) respectively.
