--------
35
--------
JUMP START DIET
MORNING SNACK
(CHOOSE JUST ONE OPTION)
8 oz. water
1 cup fat free yogurt
8 oz. water
1 cup sugar free hot chocolate
made with skim milk
8 oz. water
1 pear
8 oz. water
1 orange
8 oz. water
1 apple
8 oz. water
1 cereal bar (about 140 calories)
8 oz. water
1 kiwi
8 oz. water
1/2 cup oatmeal, cooked
1 cup skim milk
1/2 banana
8 oz. water
2 pancakes (4 inches across)
1 Tbsp. maple syrup
1/2 cup orange juice
8 oz. water
1 slice french toast
1/2 cup fresh blueberries
1 cup skim milk
8 oz. water
1/2 english muffin
1 egg poached
1/2 cup fruit juice
8 oz. water
1 slice whole grain bread
1 egg scrambled
1 cup cubed melon
8 oz. water
1 cup fat free yogurt
1/3 cup low fat granola cereal
1 cup sliced strawberries
8 oz. water
3/4 cup cereal
1 cup skim milk
1/2 cup sliced strawberries
8 oz. water
3/4 cup cereal and 2 Tbsp.
crushed walnuts
1/2 cup skim milk
4 oz. orange juice
8 oz. water
1 slice whole grain bread
1 egg scrambled or poached
4 oz. orange juice
8 oz. water
1 slice cinnamon bread
1 tsp. butter
4 oz. orange juice
BREAKFAST CHOICES
(CHOOSE JUST ONE OPTION)
--------
6
--------
STEP 1
ATTACHING THE REAR END CAP
a.
Position the Main Frame Assembly on the
Left and Right Rail Ends with both Rail Ends
slightly apart as shown.
Slide the Rear End Cap onto the Rear Tube
while aligning the screw hole on the side of
the Rear End Cap and the side of the Rear
Tube.
Insert Phillips Screw and tighten with
Phillips Screwdriver provided.
STEP 2
ATTACHING THE
FRONT END CAPS
a.
Lay the Main Frame Assembly on the
floor making sure the Rear End Cap
you just attached is against the floor
as shown.
Slide one Front End Cap into the
Support Tube Assembly, by aligning
the notch and the screw hole.
Insert Phillips Screw and tighten with
Phillips Screwdriver provided.
b.
Repeat on other side.
Main Frame Assembly
Rear
End Cap
Screw
Hole
Rail Ends
M5 x
13mm
Phillips
Screw
Screw
Hole
M5 x 13mm
Phillips Screw
Notch
Support
Tube
Assembly
Front
End Cap
Front
End Cap
2a
2b
Rear Tube
Rear
End Cap
REAR
FRONT