Fitness Technology 400S+ Manual Download Page 8

 

 

 

 

FORCE PLATE 1000 Kg 

 Capacity

 

                                                                        

FORCE PLATE 400 Kg Capacity 

 

Fitness Technology, 21 Bishop Street, Skye SA 5072 Australia 

Postal Address: PO Box 139 Fullarton 5063 Tel:  +61 8 8331 9229    Mob: 0418 815 400.     

www.fittech.com.au

 

[email protected] 

Copy

right:   Fitness Technology, Adelaide, Australia 3rd Feb 2020 Issue 1.00, 3rd Feb 2020   

Page | 7 

 
Care and Maintenance of Force Plate

 

 
To clean the Force Plate, we recommend the use of standard household detergent to wipe 
down the external surface area. 
 

Note: 

Do not place or allow any water to ingress into the Platform via the load cell holes or the 
penetration used for the USB communication port underneath the Platform. 
 

 

PRECAUTIONS 

 
Before the Force Platform is used for any purpose, checks must be carried out to ensure 
the safety of the individuals using the Platform.  Appropriate footwear must always be worn 
when using the Platform. 
 
All operators must ensure themselves that the Platform is suitable and safe for the 
application or testing purpose, by carrying out a series of tests prior to using the system.   
 
The Testing Officer or Force Plate Operator acknowledges the decision to use the Force 
Plate and it’s suitability for the purpose rests solely with their deliberate decision to use the 
device. 
 
 

Warranty. 

 
The Company warrants that the products are thoroughly examined before shipment and 
agrees to make good any part that is proved to be defective due to faulty workmanship. 
Defects or failures in equipment which, under proper use, appear therein and arise solely 
from faulty materials or workmanship will be remedied by us free of charge provided the 
equipment is returned to our Workshop within a period of twelve (12) months from date of 
delivery, freight paid both ways. In the case of warranty service to equipment "on site" or at 
the purchaser's premises, all traveling and accommodation costs shall be to the 
purchaser's account. Damage to product including broken or damaged cabling caused by 
maliciousness, negligence or through changes to electrical configuration of equipment or 
voltage in excess of rating is specifically excluded from this warranty (the Proof to the 
contrary being the onus of the purchaser). Where this occurs then such warranty real or 
implied offered by The Company, shall immediately come to an end, The Company 
extends such warranties as are offered by the original manufacturer of material.  Liability 
under this warranty applies only to repair or replacement (at the discretion of the 
Company) of the original goods supplied. The Company will not be liable for any damages 
or delay (general or consequential) whether directly or indirectly caused by the said defect, 
and shall not be responsible for any work done, or alterations, or addition, made to the 
products by any other party. 
 

NO VERBAL ARRANGEMENTS: 

If the purchaser accepts this quotation it is 

acknowledged that any variations to the terms and conditions herein defined must be 

Summary of Contents for 400S+











Reviews: