A
C
O
U
S
T
I
C
M
O
N
I
T
O
R
P
R
O
4
CLIP LED
This LED glows only when incoming signal levels from an instrument exceed the point at which
the buffer amplifier or power amp distorts, a sure sign that the signal level is too “hot.” Adjust
the volume on your instrument or preamp so that the Clip LED only glows when you whack your
instrument’s strings exceptionally hard.
LEVEL
This knob controls the volume being sent from the Input Stage to the Power Amp of the Acoustic
Monitor Pro. It does not control or affect distortion from input signals.
POWER LED
Whenever your Acoustic Monitor Pro is turned on, this LED glows. If, for any reason, you
encounter a problem with your Acoustic Monitor Pro (no sound, for instance), always check this
LED. If it isn’t glowing, then either the Acoustic Monitor Pro isn’t turned on, plugged in, or con-
nected to a working AC outlet. (Make sure the power cord is securely plugged in at both ends.
Check the outlet by plugging in something you know works.) If the LED isn’t glowing, even if the
outlet is okay and the power switch is on, then turn the Acoustic Monitor Pro off, unplug it, and
consult your dealer or Fishman Customer Service.
OPERATING INSTRUCTIONS - FRONT PANEL
