Fisher VPC-C40 Instruction Manual Download Page 79

Page: 79 / 172

English

PLAYBACK MODE

Images can be viewed continuously (slideshow playback) or you can choose
to show single images.

Display the PAGE 1 Playback Setting Screen (page 69).

Select the playback method icon

, and press the SET button.

The Playback Mode Screen
appears.

PLAY ALL:

Play back images in
slideshow fashion.

1 CLIP:

Display only the selected
image (page 39).

Select the desired playback mode.
<When PLAY ALL is selected>

The screen to set the time that each
image is displayed appears.

Toggle the SET button to the right
to select playback time.

Toggle the SET button up or down
to specify the time that each image
is shown.

Press the SET button.

Press the SET button.

The display time is set, and you are
returned to the Playback Setting
Screen.

PLAYBACK METHOD

PLAY ALL

1 CLIP

1 SEC

DURATION OF PHOTO

1 SEC

PLAYBACK METHOD

PLAY ALL

DURATION OF PHOTO

Summary of Contents for VPC-C40













































































































































































Search results

Summary of Contents for VPC-C40

Reviews:

Fisher VPC-C40, Instruction Manual, Page: 79 / 172

Search results

Summary of Contents for VPC-C40

Reviews: