Page 136
Operator‘s Manual FERITSCOPE
®
FMP30
Data Transfer
9.5.2
Control Commands
The instrument can be remote controlled and can request readings and oth-
er data by sending the control commands from the PC to the instrument. The
requested readings or the data, respectively, are then transmitted by the in-
strument via the interface port and received by the PC.
If sending the commands
“DAM”
,
“DAT”
,
“GAN”
,
“GBN”
,
“SAN”
,
“SBN”
,
“SGS”
or
“SWA”
results in an error, i.e., the respective function cannot be
executed, the instrument will return the ASCII character „NAK” via the in-
terface port to the computer.
Response: ACK (ASCII6)
Response in case of an error: NAK (ASCII21)
Command
Function
DAM0
...
DAM99
Deletes all readings that are stored in the Application with the
specified number.
Example: The command “DAM2” deletes all measurement data
of the second Application.
DAT0
...
DAT999
Request the date and time of a closed block for a certain block
(block number) from the instrument.
Example:
Send the command "DAT2"
Response of the instrument: Date and time the third block of the
open application file was closed.
ESC;
Operates the
ENTER
key
ESC:
Operates the
key
ESC0
Operates the
DEL
key
ESC1
Operates the
FINAL-RES
key
ESC2
Operates the
BLOCK-RES
key
ESC3
Operates the
ON/OFF
key
ESC4
Operates the
ZERO
key
ESC5
Operates the
CAL
key
ESC6
Operates the
key
ESC7
Operates the
key
ESC8
Operates the
APPL No
key