behr TRS 300
– 10 –
271005
behr TRS 300
– 11 –
© behr Labor-Technik 2007
271005
behr
TRS 300
Press button for
enter /
stop
+
Heating
Using the TRS 300
The operating unit
You can program and operate your behrotest®
TRS 300 control unit quite simply using a single
button. The principle is the same in all cases:
Turn the button to select an option. The option
selected is indicated by the fact that it is shown
inverted, i.e., bright characters on a dark back-
ground.
The button can be turned in both directions. In
doing this, you will pass through all the possible
options on the particular display and will always
reach the option which you wish to select.
Try it out!
Confirm the option selected by pressing the
button.
This complete procedure, i.e., „Selecting by
turning“ and „Selecting by pressing“ is referred
to below simply as „Selecting“.
