TM
In addition to the parts pictured on pages 6 and 7 in the enclosed Owner’s Manual, we’ve included
two C-clips. Please refer to the following instructions to assemble the C-clips to the base and to
attach the vehicle to the base before beginning Assembly Step 1 in the Owner’s Manual.
• Make sure the C-clip end tab is in the slot. Then,
push firmly to snap the C-clip locking tab into the slot in
the base. Make sure you hear the tab snap into the slot.
• Repeat this procedure to assemble the other C-clip to
the base.
• Assembly of the C-clips is now complete.
3-in-1Ride & Drive
Model #76950
Supplemental Assembly Instructions
• Insert the end tab on a C-clip into the slot in the base.
C-clip
End Tab
Slot
Base
C-clip
Slot
Base
Assembling the C-Clips
Important Note! Follow these C-clip assembly instructions carefully. The C-clip assembly is a permanent snap.
If you do not fit the C-clip end tabs in the base before snapping in the C-clip locking tab, you will not be able to
remove the C-clip to correct the assembly.
1
2
C-clip
Slot
C-clip
Locking Tab
Locking Tab
Slot
End Tab
