background image

DRH68

fisher-price.com

Product features and decorations may vary from the photograph.

•  Keep this instruction sheet for future reference, as it contains 

important information.

•  Adult assembly is required. Tools required for assembly: Phillips 

Screwdriver, Hammer and Scrap Block of Wood (not included).

•  Requires three AA (LR6) 

alkaline

 batteries (not included). 

•  Age: 2-6 years.
•  Weight limit: 60 lb (27 kg).
•  Choose areas for riding that are free of obstacles.
•  Learn to stop safely.
•  Use with caution as this product requires skill to operate safely 

to avoid falls, collisions, and injuries to yourself (the rider) 
and others.

IMPORTANT!

 It is good practice to start training children very 

young regarding the importance of helmet use. When children are 
older and riding bicycles and faster vehicles, it is important that 
they use a helmet each and every time they ride. For this reason, 
even while riding a tricycle, it is a good idea to familiarize your 
child with helmet use, so that it becomes a habit for life. In the 
United States, choose a helmet that complies with requirements of 
the U.S. Consumer Product Safety Commission (CPSC) Standard 
16 CFR 1203. Outside the U.S., choose a helmet that complies 
with the requirements of the applicable certifying agency for 
bicycle helmets.

Summary of Contents for DRH68









Reviews: