3
• Place a tube with tapered end and regular end on a flat surface.
• Fit a tube with tapered ends into the regular end, as shown.
Hint:
The tube assembly should form this shape .
• Align the holes in the tubes.
• Fit a lock nut, rounded side out, into the
hex hole on the inside
of
the tube with tapered end and regular end.
• Insert a screw through the outside of the tube with tapered end and
regular end.
• While holding the lock nut in place with your thumb, tighten the screw.
• Placer un tube avec un bout effilé et un bout normal sur une
surface plane.
• Insérer un tube avec bouts effilés dans le bout normal, comme illustré.
Remarque :
Les deux tubes assemblés devraient avoir cette forme .
• Aligner les trous pratiqués dans les tubes.
• Mettre un écrou de sécurité, côté arrondi vers l’extérieur, dans le
trou hexagonal situé du côté intérieur
du tube avec un bout effilé
et un bout normal.
• Insérer une vis dans le côté extérieur du tube avec un bout effilé et
un bout normal.
• Tout en retenant l’écrou de sécurité en place avec le pouce, serrer la vis.
• Fit the long end of a side tube onto either tapered end of the assembly.
• Align the holes in the two tubes.
Hint:
If the holes in the tubes do not align, remove the side tube and
place it on the other end of the assembly.
Side Tube
Tube latéral
Tapered End
Bout effilé
Long End
Extrémité longue
Tube with Tapered End
and Regular End
Tube avec un bout effilé
et un bout normal
Tube with Tapered Ends
Tube avec bouts effilés
1
Rounded Side
Côté arrondi
2
Rounded Side
Côté arrondi
Assembly Assemblage
• Fit the long end of the other side tube onto the other tapered end of
the assembly.
• Align the holes in the two tubes.
• Fit a lock nut, rounded side out, into the
hex hole on the inside
of
the side tube.
• Insert a screw through the hole on the outside of the side tube.
• While holding the lock nut in place with your thumb, tighten the screw.
• Glisser l’extrémité longue de l’autre tube latéral sur l’autre bout effilé
de l’assemblage.
• Aligner les trous pratiqués dans les deux tubes.
• Mettre un écrou de sécurité, côté arrondi vers l’extérieur, dans le
trou hexagonal situé du côté intérieur
du tube latéral.
• Insérer une vis dans le trou pratiqué sur le côté extérieur du
tube latéral.
• Tout en retenant l’écrou de sécurité en place avec le pouce, serrer
la vis.
Side Tube
Tube latéral
Tapered End
Bout effilé
Long End
Extrémité longue
3
Rounded Side
Côté arrondi
• Fit a lock nut, rounded side out,
into the hex hole in the inside
of
the side tube.
• Insert a screw through the hole on the outside of the side tube.
• While holding the lock nut in place with your thumb, tighten the screw.
• Glisser l’extrémité longue d’un tube latéral sur un des deux bouts
effilés de l’assemblage.
• Aligner les trous des deux tubes.
Remarque :
Si les trous ne s’alignent pas, enlever le tube latéral et
le placer sur l’autre bout de l’assemblage.
• Mettre un écrou de sécurité, côté arrondi vers l’extérieur,
dans le
trou hexagonal situé du côté intérieur
du tube latéral.
• Insérer une vis dans le trou pratiqué sur le côté extérieur du
tube latéral.
• Tout en retenant l’écrou de sécurité en place avec le pouce, serrer
la vis.