Lit. No. 74916, Rev. 01
6
July 15, 2020
95150, 95160, 95180-3, 95190-3
3.
Remove the hardware and blocking that secures
the T‑frame to the pallet.
4.
Remove the strapping that secures the headgear
to the T‑frame.
5.
While supporting the headgear, remove the self‑
tapping screw from each shipping bracket and
discard.
6.
Remove the cable ties and discard. Remove and
retain the 3/4" x 2‑1/2" clevis pins. Discard the
shipping brackets.
7.
Remove the packaging from the lift chain so that
it has enough slack for the headgear to move
upward as necessary.
8.
Align the headgear holes with the T‑frame holes
selected above. Connect the headgear to the
T‑frame by installing the two 3/4" x 2‑1/2" clevis
pins from the outside of the headgear through
both sets of holes. Install 3/4" flat washers and
5/32" x 1‑1/2" cotter pins from the parts bag to the
clevis pins.
3/4" x 2-1/2"
Clevis Pin
5/32" x 1-1/2"
Cotter Pin
3/4"
Flat Washer
