Fisher & Paykel WM1490P2 User Manual Download Page 9

Page: 9 / 48

CONTROL PANEL

Power

Press to turn the washer

ON/OFF

Keylock

Press to disable all buttons on the control panel, except the

POWER

button. This prevents accidental button presses.

SmartTouch™

Control Dial

Rotate to select your desired wash cycle.

Icon of the selected wash cycle will illuminate.

Digital display

screen

Shows the following:

TIME TO GO

– the remaining time in the cycle that is

currently running.

Delayed start time of wash cycle.

Notifications if an error is detected or a warning is necessary.

Progress lights

Indicate the current status of the wash cycle.

All lights are illuminated at the start of the wash cycle.

The light of the current status flashes, and then turns off
once completed.

Delay Start

Less/More

Press

to increase and

LESS

to decrease the delay

start time.

Optimise Wash

Press to select

ECO

SPEED

Wash Temp

Press to increase or decrease wash water temperature.

Spin Speed

Press to increase or decrease spin speed.

Wash Boost

Press to select

PRE WASH

RINSE+

WASH+

Options

Press to select

WRINKLE FREE.

Add a Garment

Press to interrupt the wash part of the cycle to add or
remove items.

Start/Pause

Press to start or pause the selected wash cycle.

Summary of Contents for WM1490P2

















































Search results

Summary of Contents for WM1490P2

Reviews:

Related manuals for WM1490P2

Brands by name

Popular brands

Fisher & Paykel WM1490P2, User Manual

Search results

Summary of Contents for WM1490P2

Reviews:

Related manuals for WM1490P2

Brands by name

Popular brands