Fisher & Paykel SINGLE DISHDRAWER DD24STX6HI, Installation Manual

Page: 10 / 24

10
PLUMBING & ELECTRICAL CONSIDERATIONS
a a b c b
G G
c
d d
H H
e e
f f
SERVICE DIMENSION
LEFT SIDE* RIGHT SIDE*
INCHES MM INCHES MM
A
Length of drain hoses 78 1/2 2000 66 15/16 1700
B
Length of power cord** 29 1/2 750 27 1/2 700
C
Length of inlet hose 64 3/4 1650 49 3/16 1250
D
Distance from floor to top of
hose support 29 1/2 –
34 3/4
750 – 883
29 1/2 –
34 3/4
750 – 883
E
Minimum distance from floor to end
of drain hoses***
19 11/16 500 19 11/16 500
F
Minimum distance from floor to inlet
hose connection
7 7/8 200 7 7/8 200
G
Maximum distance from cabinetry
centre of electrical outlet
17 11/16 450 17 11/16 450
H
Maximum distance from floor to top
of Air Break
37 3/8 950 37 3/8 950
*dimensions taken from the chassis edge where applicable
**excluding plug
***standpipe install illustrated. Distance is the same for sink trap installations.
Hose and cord lengths
z
Your services can be installed to either the left-hand or right-hand side
of the product in an adjacent cabinet. Refer to 'Cabinetry preparation'
for service access requirements.
z
If the drain hoses supplied are not long enough to reach your services,
you may purchase a Fisher & Paykel drain hose extension kit which will
extend the drain hoses by 3.6m (part number 525798).
Water connection
z
Recommended water temperature: hot (Maximum 140°F/60°C).
z
Supplied hose to suit 3/8" (9 mm) male compression fitting.
z
Ensure water connection complies with local plumbing regulations.
Water pressure
z
Water softener models: max. 1 MPa (145 psi), min. 0.1 MPa (14.5 psi)
z
Non-water softener models: max. 1 MPa (145 psi), min. 0.03 MPa (4.3 psi)
Electrical requirements
z
120 V, 60 Hz, 15A