52
Tools
Ruler
Roll the first appliance slowly into one side of the cabinetry until
the anti-tip bracket overlaps the back edge of the appliance.
Ensure the bracket overlaps the appliance by a minimum 180mm
for a secure hold. Refer to 'Attach the anti-tip bracket' for more
information.
Align the top cap of the first appliance flush with the front of the spacer.
Mark the step of the depth gauges on the cabinetry side of the
door based on the thickness of door panel.
Align the marked line flush with the front surface of the adjacent
cabinetry.
PROFILE VIEW
min 7 1/16" (180mm)
1
1
first appliance
anti-tip bracket
top cap
marked line
spacer
depth gauge
Illustrations may differ from your purchased appliance.
Pushing first appliance into the cabinetry
Aligning the depth gauges
MULTIPLE INSTALLATION — ALIGN FIRST APPLIANCE INTO CABINETRY
Summary of Contents for RS4621F
Page 2: ......
