9
A
B
D
E
C
FITTING THE OPTIONAL BACKGUARD
Grounded outlet
●
●
The electric cord with 4-prong ground plug
(NEMA 14-50P) shall have a minimum length
of 48” (1220mm) beyond the back of the
range.
LOCATION OF ELECTRICAL SUPPLY
Final position of cooker against wall
Left side
of cavity
Floor
Electricity
D
B
A
A
C
SUPPLY AREA DIMENSIONS
inches (mm)
A
Distance from either edge of
Range to supply area
3/16” (5)
B
Height of electrical supply area
(from floor)
2 3/16” - 4 1/8” * (55-105)*
C
Width of electrical supply areas
29 1/2” (749)
D
Depth of supply area (ie
maximum protrusion of electrical
connection from wall)
3 15/16” (100)
* Depending on adjustment of feet
A
B
D
E
C
Island trim and backguard
●
●
It is mandatory to install and use the appliance with either
the island trim or the optional backguard correctly in place.
●
●
The island trim is already fitted to the appliance while the
backguard can be purchased as a separate kit.
●
●
If replacing the island trim with the backguard, assemble it
by using the same screws/spacers used for fixing the island
trim.
7
1
GAS AND ELECTRIC CONNECTION
Fig. 1.2
Dotted line showing the position
of the range when installed
Area for
ELECTRICAL
connection
Area for
GAS connection
C
A
C
D
D
Ref.
inch
mm
A
2” 11/64 - 4” 9/64 (*)
55.2 - 105.2 (*)
B
2” 61/64 - 4” 59/64 (*)
75 - 125 (*)
C
14” 3/4
374.5
D
13/64”
5
(*) : Depending on feet regulation
ISLAND TRIM AND BACKGUARD
•
It is mandatory to install and use the appliance
with the island trim or backguard correctly in
place.
•
The island trim is already fitted to the appliance
while the backguard can be purchased as a
separate kit.
•
If replacing the island trim with the backguard,
assemble it by using the same screws/spacers
used for fixing the island trim (figures 1.3a,
1.3b).
12 x
12 x
Fig. 1.3a
Fig. 1.3b
A
B
A
B
B
7
1
GAS AND ELECTRIC CONNECTION
Fig. 1.2
Dotted line showing the position
of the range when installed
Area for
ELECTRICAL
connection
Area for
GAS connection
C
A
C
D
D
Ref.
inch
mm
A
2” 11/64 - 4” 9/64 (*)
55.2 - 105.2 (*)
B
2” 61/64 - 4” 59/64 (*)
75 - 125 (*)
C
14” 3/4
374.5
D
13/64”
5
(*) : Depending on feet regulation
ISLAND TRIM AND BACKGUARD
•
It is mandatory to install and use the appliance
with the island trim or backguard correctly in
place.
•
The island trim is already fitted to the appliance
while the backguard can be purchased as a
separate kit.
•
If replacing the island trim with the backguard,
assemble it by using the same screws/spacers
used for fixing the island trim (figures 1.3a,
1.3b).
12 x
12 x
Fig. 1.3a
Fig. 1.3b
A
B
A
B
B