47
11.3 ACCESS TO CONSOLE AREA
1.
Remove 2 screws from the rear of the console.
2.
The console can now be raised for access to the Motor Controller Module, Display Module,
Inlet Chamber and associated wiring.
11.4 DISPLAY MODULE
1.
Connect a Static wrist strap to ground.
2.
Unplug the 3 way wiring harness (A) from the Motor Controller Module.
3.
Unscrew the 3 screws holding the DISPLAY MODULE to the console.
4.
Remove the DISPLAY MODULE from the console.
Do not poke any tools or instruments into either Module as damage to the electronic components
could result.
NOTE:
Any Modules removed from the washer for return must be protected from electrostatic damage.
Use the packaging from the modules to return the faulty modules.
