33
CHANGING PRE-SET OPTIONS
Option Adjustment mode
After using your washer a number of times
you may want to fine tune some of the
options to suit your wash needs.
There are a number of pre-set options, which
can be changed:
1
The wash temperatures, including
changing the
COLD
wash temperature to
CONTROLLED COLD
.
2
The out of balance recovery routine.
3
The number of beeps at the end of
the cycle.
4
Resetting to factory default settings.
To change or reset any of the options, repeat the above steps.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Turn the washer on at the wall but do
not touch
.
Touch and hold the and
together
for 3 seconds. You will hear three quick
beeps indicating you have entered
Option Adjustment mode. The washer
will show the default setting for the
COLD
wash temperature.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Use the dial and buttons on the control panel
to make your changes to the pre-set options.
Touch
to return to normal mode when
you have finished modifying your options.
Your washer will automatically remember
your changes.
+
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
To enter Option Adjustment mode
1
2
3
ICON
DEFAULT
CUSTOMISED
FUNCTION
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Heavy
Wash Temp
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Delicate
OOB
Recovery
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Wool
EOC Beeps
Wash Temp
OOB Recovery
Factory Reset
EOC Beeps
Easy Iron
Factory Reset
