15
CONTROL PANEL
1
POWER
Press to turn the dryer on/off.
2
Keylock
Press for two seconds to disable all buttons on the display panel,
except ‘POWER’
. This prevents accidental button presses.
3
Drying cycles
Select your desired drying cycle.
z
Red LED illuminates to indicate the selected drying cycle.
4
Digital display
screen
Shows the following:
z
Delayed start time of the drying cycle.
z
Notifications if an error is detected or a warning is necessary.
5
Delay Start
Press to increase the delay start time for drying cycles.
Note: Delay start is not available for time dry cycles.
6
Progress lights
The progress lights indicate what stage of the cycle the dryer is
currently at (‘Damp’, ‘Dry’ or ‘Cooling’). All three lights are on at
the beginning of the cycle. The light for the current stage of the
cycle flashes, and each one goes out when that stage of the cycle
is complete.
7
Dryness Level
Allows you to select the level of dryness for your load.
8
Dry Temp
Allows you to select the drying temperature for your cycle.
9
START/PAUSE
Press to start or pause the selected drying cycle.
!0
Lint Filter
The lint filter light will flash when the machine is switched on as a
reminder to clear the lint filter before each cycle.
DE7060M, DE6060M and DE5060M models
7
8
9
!0
2
4
1
3
5
6
Summary of Contents for DE4560M
Page 2: ......
