Fisher & Paykel AeroSmart DE62T27CW1, Servlce Manual

Page: 8 / 29

517760C
8
4 COMPONENTS
The only visual change of major components between the G (General), I (Intuitive™) and the
AeroSmart
™
dryer is with the console assembly.
The Aerosmart
™
LCD models incorporates an IMD (In-mould decorative display), which uses
capacitive touch buttons that sense the user’s fingers over the buttons. It has a large LCD Display
allowing us to show graphics on the screen. The new screen allows us to present information
simply while providing a lot more detail, such as graphic icons, pop up explanations and
confirmation.
The AeroSmart
™
LED models incorporates backlit buttons, with the selected button illuminated
more brightly than the others. Words indicating selections made are also illuminated.
4.1 Control Panel Assembly
The three core components of the control panel assembly are the console, the fascia, and the PCB
and housing.
Console
The console, which is made from ABS is the
housing to which the fascia and PCB housing
attaches. Lugs at the base of the console
locate into the top deck. The console is secured
to the rear of the top deck by two screws.
Fascia
The fascia will be one of either the IMD fascia
for LCD models or the touch panel for LED
models.
PCB and Housing
The PCB, which contains the electronics, is
mounted within a plastic housing. The PCB
housing is clipped into the console at the
bottom, and secured with four screws along the
top.