8
Front side view
7
REMOVE HINGE BRACKET
IMPORTANT!
Follow these steps to remove the hinge bracket on the non-hinge side of both left and
right hinge appliances.
Removing hinge brackets from appliance
1
Measure the distance between the end of the top trim and the side of the cabinet.
●
●
Ensure the distance is not greater than 1/4” (6mm).
●
●
If distance is greater than 1/4” (6mm), loosen the screws at the back of the trim and shift
the trim sideways to suit.
2
At the non-hinge side of the appliance, loosen the M5x10 pan head attachment screws from
the end of the top trim, and then shift the screws towards the centre of the trim. (
A
)
B
A
3
Unscrew the countersunk screws with a crosshead screwdriver to remove the hinge bracket
from the appliance. (
B
)
<1/4” (<6mm)
Top trim
Note: illustration above shows cavity for RS36W80/RS9120W model.
