FISCHER PRO-LINE DE90, Operating Manual

Page: 69 / 116

FISCHER Mess- und Regeltechnik GmbH Operation | 5
BA_EN_DE90 69
5.5.3.1 Mode C3
Directory: \ Configuration/Channel 3/Mode C3
Level: 3
\...\...\Mode C3
1 2 3 4
Inactive
Difference
Dyn. filter monitor.
Back
S
R
U
R
E
Option field
Fig. 96: Mode C3
Parameter value Description
Inactive S
Enabled or disabled Channel 3
Difference R
Difference of the input channels
Dyn. filter monitor. R
Monitoring of filters in ventilation sys-
tems
Back E
This represents the output (exit) of the
menu. It takes you back to the Channel
3 menu.
The operating modes
Difference
and
Dyn. filter monitoring
re-
quire different parameterization of the characteristic curve. Therefore, the call-
ing menu after the exit is supplemented by the menu extension
Characteristic K3
, with which the characteristic curve for the selected
mode is parameterized.
See also
2
Characteristic C3 (menu expansion) [
}
70]
5.5.3.2 Measurement C3
Directory: \Configuration\Channel 3\Measurement C3
Level: 3
\...\...\Measurement C3
1 2 3 4
Limit C3
Back
G
U
E
Fig. 97: Measurement C3
Menu name Description
Limit C3 G
This property determines whether the
measured values are limited to the set
limits.
Back E
This represents the output (exit) of the
menu. This takes you 'Back' to the
Channel 3 menu.
The limits of the display values are set in the
Characteristic C3
menu.