FISCHER PRO-LINE DE90, Operating Manual, Page: 47 / 116

FISCHER Mess- und Regeltechnik GmbH Operation | 5
BA_EN_DE90 47
5.5.1.2 Measurement C1
Directory: \Configuration\Channel 1\Measurement C1
Level: 3
\...\...\Measurement C1
1 2 3 4
Meas.range C1 unit
Meas.range C1 start
Meas.range C1 end
Damping C1
A
U
Fig. 58: Measurement C1
In this menu, the linear starting range is configured independent of the set oper-
ating mode.
Menu name Description
Meas.range C1 unit A
In this menu, the measurement unit of
the physical variable that is to be
measured (pressure) must be defined.
Meas.range C1 start
The start of the measuring range is
defined with this parameter.
Meas.range C1 end
The end of the measuring range is
defined with this parameter.
Damping C1
The damping parameter serves to
dampen the display.
Offset C1
The characteristic is displaced with the
parameter offset.
Zero-pt. window C1
The zero point window parameter
defines a range around zero in which
the display value is set to zero.
Limits G
This property determines whether or
not the set measuring range limits also
act on the meas.data display.
Back E
This represents the output (exit) of the
menu. Press 'back' to return to the
channel 1 menu