FISCHER FISCHERSCOPE X-RAY XDLM 231, Operator'S Manual

Page: 94 / 236

Task programming Starting a Task
92 FISCHERSCOPE
®
X-RAY
12 Task programming
A Task is a sequence of predefined commands which can be used
for programming WinFTM procedures.
12.1 Starting a Task
The menu command “Task > Task start” starts a task.
Use the F3 function key to interrupt the program run.
12.2 Programming Tool
The commands are similar (or in some cases equal to) the import
commands. The list of commands represents a TXT file which can
be edited by common programs. WinFTM supports this
"programming" by a tool which inserts the selected commands with
a double-click in the command list of the task.
Selecting and opening a task
The menu command “Task > Task Modify or Create” opens the
dialog window „Open“, in which you can select and open tasks.